EN 
EN
Service Line
+8613607332279
Carbide grades and Applications recommended
Time: 2024-12-02 Hit: 32
| Grade | Physicaland mechanical properties | Applications recommended | ||
| Density g/㎤ | Hardness HRA(HV) | TRS Mpa | ||
| YG6 | 14.95 | 89.5 | 2580 | Universal grades widely used in machining tools for cast iron,nonferrous metals and their alloys and nonmetal materials,wearparts,and tools for machining other alloys. |
| YG8 | 14.74 | 89 | 2710 | |
| YG6X | 14.93 | 91 | 2480 | Suitable for the semi-finishing of hard cast iron,nonferrous metals and their alloys,and also suitable for the semi-finishing and finishing of common cast iron and high manganesesteel work-pieces and for other tools. |
| YG6A | 14.89 | 91.5 | 2350 | |
| YG8C | 14.69 | 87.5 | 2850 | Mainly used for rock drilling,auger tips and well drilling tools and also used for drilling stone walls,cementin construction and installation work,and for machining stone materials. |
| YC11C | 14.32 | 86.5 | 2940 | |
| YGL10.2 | 14.45 | 91.51600(HV3) | 2880 | Mainly used for manufacturing strips and disc cutters and also for other tools. |
| YM80 | 14.76 | 90.5 | 2590 | Mainly used for manufacturing strips and also for other tools. |
| YS2T | 14.45 | 91.51600(HV3) | 2380 | Mainly used for disc cutters and also for other tools. |
| YM15.1(YS8) | 14.05 | 92.5 | 2170 | Suitable for the rough and semi-finishing of Special Heat-Resistant Stainless Steel,finishing of high strength steel,Finish and Semi-finishing of hardened steel,and the machining of iron based hetr-resistant alloys and glass articles. |
